Coronavirus (COVID-19) update

For latest Covid-19 information click on the link below.

Coronavirus (COVID-19) update.

SRUC Training Courses: Chainsaw Operation: Basic Maintenance, Safety and Crosscutting

Accrediting Body

Lantra Awards


This two day training course will take place on site or at one of our campuses and will cover chainsaw maintenance, crosscutting and stacking techniques, tailored to the individual's needs. It will be delivered by qualified instructors and leads to Lantra Awards certification.

What is Involved?

• HSE legislation and safety guidelines
• Overview of the chainsaw and maintenance equipment
• Maintaining the saw chain
• Maintaining the guide bar
• Power unit maintenance
• Starting the chainsaw and pre-cutting tests
• Cross-cutting timber

Entry Requirements

There are no formal entry requirements for this course.

Certification/Award on Completion

Lantra Awards Certificate

What you will need to bring

Appropriate PPE as per the list below:

Safety helmet complying with EN397. It is recommended that arborists working from a rope and harness use a mountaineering style helmet.

Suitable hearing protection complying with EN352.

Eye protection: mesh visor complying with EN1731 or safety glasses to EN166.

Upper body protection: Chainsaw jackets to BS EN 381-11. Chainsaw jackets can provide additional protection where operators are at increased risk (eg trainees, unavoidable use of a chainsaw above chest height). However, this needs to be weighed against increased heat stress generated by physical exertion (eg working from a rope and harness).

Gloves*: The use of appropriate gloves is recommended under most circumstances. The type of glove will depend on a risk assessment of the task and machine. Consider the need for protection from cuts from the chainsaw, thorny material and cold/wet conditions. Where chainsaw gloves are required these need to be to have protective guarding on back of left hand and comply with EN 381-7.

Leg protection* incorporating chain clogging materials complying with EN381-5. (All-round protection is recommended for arborists working in trees, for trainees and occasional users, such as those working in agriculture.)

Protective boots* with good grip and protective guarding at front vamp and instep complying with BS EN ISO 20345:2004 and bearing a shield depicting a chainsaw to show compliance with EN 381-3. (For occasional users working on even ground where there is little risk of tripping or snagging on undergrowth or brash, protective gaiters conforming to EN 381-9 may be worn in combination with steel-toe-capped safety boots.)

Non-snag outer clothing. The use of high-visibility clothing may also be appropriate.

Personal first-aid kit including a large wound dressing.

All personal protective equipment must comply with HSE/CE standards and must be undamaged and fully serviceable. *These items should carry the CE chainsaw logo

Chainsaw and Equipment:
SRUC would encourage you to bring your own saw and tools for this course. The list below will provide further information about the equipment you would need to bring.
However should you not have your own saw SRUC are able to supply all equipment required for this course without any additional fees.

Rear handled chainsaw
Maximum recommended guide bar length is 15”
Manufacturer’s handbook
Ensure the stop switch works and is clearly marked;
Ensure the front hand guard/chain brake, chain catcher and anti-vibration mounts are undamaged and functional;
Ensure the throttle opens only when the throttle lock is depressed;
Ensure it is fitted with a chain type recommended by the manufacturer and is designed to reduce kickback, which is the uncontrolled upward and/or backward motion of the guide bar. It happens when the nose of the guide bar contacts an object such as a log or branch or when the wood pinches the saw chain in the cut
Ensure the exhaust system and silencer are in good order;
Ensure there is a mandatory hearing protection symbol on the chainsaw.
Make sure you have the equipment recommended by the manufacturer to carry out sharpening, maintenance and adjustments and a chain cover for transportation.
Tool belt with logger tape, pulp hook and tongs
Breaker bar with cant hook
High lift wedges

You will also need to bring 1 Passport Photograph if you would like to receive a Skills ID card on completion of the course.

Course Dates

SRUC Barony Campus:
6th & 7th May 2021
3rd & 4th June 2021


2 days

Start/Finish Times

9am to 4.30pm approximately


On Customer premises;
SRUC Auchincruive Estate;
SRUC Barony Campus;
SRUC Elmwood Campus;
SRUC Oatridge Campus.


£305.00 per person. Course fees include training, assessment and registration fees. Please note there is no VAT on our training.


Important update

Individual Training Accounts will open on Monday 13 January 2020.

This phase of the scheme will accept up to 10,000 new applications.

SDS Individual Training Accounts (ITA)

You may be eligible for part funding to support the cost of this course.

Get up to £200 towards the cost of a training course with an SDS Individual Training Account (ITA).

You could use the money to build the skills you need for a job. Or get some training to take your career to the next level. Whatever you want to do, there is a wide range of ITA approved courses on offer.
And because it's not a loan you don't have to pay it back.

Sounds good? Start searching for an ITA approved course and apply online.
For further information please visit:

How do I book?

To book a place on one of our courses, please complete and return the course booking form to the appropriate campus address or email address shown below. Course fees must be paid in full at the time of booking. Payments can be made over the phone using a debit/credit card, by cheque made payable to SRUC or by Bank Transfer (for bank transfer details please contact your chosen campus).


Cancellations must be made at least 10 working days prior to the course start date otherwise the full course fee is still payable. In the event that SRUC has to cancel a course for any reason your course fees will be refunded in full or your booking transferred to the next available date if this is suitable.


Fiona Lanni (SRUC Ayr/Barony)


Contact 2

Liz Rioch (SRUC Elmwood)

01334 658842

Contact 3

Samantha Bain (SRUC Oatridge)


Contact 4

Tom Findlay or

Ann-Marie Duncan